«ALPYR Test» gel clot test Standard
The kit is designed for LAL-test using the gel-clot test method and is designed for 300 determinations, which means 36-40 samples by the qualitative method (method A) or 15-18 samples by the quantitative method (method B). The kit contains reagents and basic auxiliary materials for the analysis.
360° Photo
There is a certificate of quality or a certificate of analysis for each kit item.
| Name | Features | Quantity |
| LAL-reagent | Endotoxin-specific LAL-reagent is intended for LAL-test by gel clot test (methods A and B) and kinetic turbidimetric method (method C). Reagent sensitivity – 0.03 EU / ml; Contains carboxymethyl curdlan, divalent cations and a buffer. Does not require additional use of buffer solutions and β-blockers; Release form – 10 ml bottles with contain the amount of LAL-reagent required to obtain 5.2 ml of solution at a dilution; Storage conditions: at a temperature of +2-8 °С; Designed for LAL-test by gel clot test (methods A and B) and kinetic turbidimetric method (method C). The reagent sensitivity in the gel clot test is indicated on the bottle label. The sensitivity in the kinetic turbidimetric method is determined by the selected range of the calibration curve, the maximum range is from 0.01 to 10 EU / ml | 6 bottles x 5.2 ml |
| Control Standard Endotoxin | Each batch of LAL-reagent corresponds to a series of control standard endotoxin. This compliance is confirmed by a certificate of analysis issued by the manufacturer. | 1 bottle x 500 ng |
| LAL Reagent Water «ALPYR Water» | It is used for dilution of LAL reagent, control standard endotoxin, test drugs and active pharmaceutical substances, for preparing washes from medical devices. Contains bacterial endotoxins in an amount of less than 0.005 EU / ml | 6 bottles x 50 ml |
| LAL-test Tubes «ALPYR Tube» 10×75 mm | Designed for analysis and dilution preparation. The tubes are packed in two layers of foil; Each package includes instructions for use; Documentation (quality certificates) for tubes of different series | 6 packs x 50 pcs |
| LAL-test Tubes «ALPYR Tube» 13×100 mm | Designed for analysis and dilution preparation. The tubes are packed in two layers of foil; Each package includes instructions for use; | 6 packs x 30 pcs |
LAL-reagent, included in the kit, is a new generation endotoxin-specific LAL-reagent, which does not require additional use of β-blockers and buffer solutions.
The kit components ratio was selected for 300 determinations, which corresponds to the verification of 36–40 samples by the qualitative method (method A) or 15–18 samples by the quantitative method (method B). Everything is in a special packaging of a convenient form factor.
When choosing a ready-made kit, you don’t have to worry about calculating the required quantities and order the necessary reagents and materials separately.